winston

Username:winston

Registered :2018-01-31

Topics Number: 1     Posts Number: 155

Homepage: https://www.compex.com.sg/

Introduction:
Compex Engineer

Last activity 2018-10-19
Replied to topic  › 关于CNMS管理AP时,无法scan ap

Please contact your Compex salesman.

«  2018-10-19
Replied to topic  › Nand flash in WPJ428

Can you try to flash this firmware:

«  2018-10-19
Replied to topic  › WPJ563 w/ WLE1216V5-20

Can you try the latest firmware here:

«  2018-10-16
Replied to topic  › 关于CNMS管理AP时,无法scan ap

Do you have serial converter?

A Compex serial converter is shown in the red box here:

«  2018-10-16
Replied to topic  › 关于CNMS管理AP时,无法scan ap

You must use correct firmware.

«  2018-10-12
Replied to topic  › 2.4Ghz & 5Ghz not working at same time

Can you show some samples of the eye diagrams with labelling?

«  2018-10-08
Replied to topic  › [WPJ563]How to enable the PCIe test mode?

Due to confidential information, you may want to submit support ticket.

«  2018-10-05
Replied to topic  › [WPJ563]WLE650V5-18A Low Performance

You can contact Remy. He knows you.

«  2018-10-03
Replied to topic  › [WPJ563]WLE650V5-18A Low Performance

Please see our latest testing results here :

«  2018-10-03
Replied to topic  › 2.4Ghz & 5Ghz not working at same time

Please write me your

«  2018-10-02
Replied to topic  › [WPJ563]WLE650V5-18A Low Performance

What firmware are you using e.g. OpenWRT or LEDE and what kernel version?

«  2018-10-02
Replied to topic  › 关于CNMS管理AP时,无法scan ap

Cannot just double click on the .img file.

«  2018-10-02
Replied to topic  › 关于CNMS管理AP时,无法scan ap

«  2018-09-27
Replied to topic  › 关于CNMS管理AP时,无法scan ap

What is the firmware version that you are using?

«  2018-09-26
Replied to topic  › WLE650V5-18A not working

Please write us the Embedded board / PC / motherboard manufacturer, model #, version etc.

«  2018-09-17
Replied to topic  › WLE600VX AP+STA on different channels

If you set the Channel to Auto, it should follow the channel of the customer wifi network.

«  2018-09-17
Replied to topic  › WLE600VX not recognised

The WLE600VX is 802.11ac, different from the 802.11n card.

«  2018-09-14
Replied to topic  › WLE600VX AP+STA on different channels

Do you have any problem with using on the same channel?

«  2018-09-14
Replied to topic  › WLE600VX AP+STA on different channels

Hello,

«  2018-09-13
Replied to topic  › WLE600VX not recognised

Please refer to:

«  2018-09-12
Replied to topic  › WLE650V5-18A not working

Your board-2.bin file is correct.

«  2018-09-12
Replied to topic  › WLE650V5-18A not working


«  2018-09-11
Replied to topic  › Ad-hoc / IBSS mode

IBSS is not supported.

«  2018-09-11
Replied to topic  › How do I enable 1GB on WPQ865 ?

We don’t have much information for OpenWRT on WPQ865. If we have additional information we would update you.

«  2018-09-06
Replied to topic  › 11AC card (WLE1216V5-20 7A) is detecting as 2.4GHz

Reply to #4 @vigenshwaran :

5GHz card would not act as 2.4GHz.

«  2018-09-06
Replied to topic  › Default root password

Reply to #4 @umutyildiz :

Sent you the root password.


Upgrading the firmware is according to : 

«  2018-09-06
Replied to topic  › 11AC card (WLE1216V5-20 7A) is detecting as 2.4GHz

Please follow the instructions for 

ath10k/LEDE/OpenWRT Build Instructions Using boardData File

given in 

«  2018-09-05
Replied to topic  › 11AC card (WLE1216V5-20 7A) is detecting as 2.4GHz

Please write us your kernel information.

«  2018-09-04
Replied to topic  › NAT mode layer 3

Dear Sir, 


Our firmware does not support NAT mode layer 3.


Thanks

«  2018-08-24
Replied to topic  › Where I can download firmware of these mesh model: MP546 and MPE72

Dear Sir,


Sorry to inform you and hope you kindly understand about we were unable to provide any related supports for the boards you mentioned above here due to these boards already subjected to EOL.


Thanks.

«  2018-08-21
Log in
Information Bar
Welcome to the Compex Support Forum. To start with an enquiry:

1) Sign up for an account.
2) Create a topic and describe the issue as detail as possible.
3) Use the tags on your post to help us identify the issue. Eg. Hardware, Software, Module.

F.A.Q
How do I generate a verification code?
To generate the verification code, simply click on the form. It will create a 4 character code. Simply fill it in.

LINKS

Compex Website
Compex Webshop