JustWiFi⁷™ | WPM530

Categories: ,

IPQ5322 SoC + QCN6274 WiFi 7 (802.11be) 2×2 MU-MIMO 2.4GHz, 5GHz, 6GHz Tri-Band Module

  • Qualcomm IPQ5322 Quad-Core Cortex-A53 1.5GHz processor ‘Miami’ series
  • Qualcomm QCN6274 ‘Waikiki’ series for radio chipset
  • 512MB, DDR4 16-bit (1×16-bit) interface, 128MB NAND Flash
  • Concurrent Tri-Band Wi-Fi 7 support
  • MiniPCIe Interface for powering the module only
  • Supports 10Gbps serial interface with Ethernet protocol
  • 70mm × 50.8mm × 12mm (W x H x D)

         

Description

JustWiFi⁷™, WPM530 is a  one-of-kind, driverless, tri-band WiFi 7 (802.11be) module powered by Qualcomm’s IPQ5322 SoC and QCN6274 ‘Waikiki’ series radio solution. This is a 2×2 MU-MIMO 2.4GHz, 5GHz and 6GHz solution, connecting via Ethernet protocols at 10Gbps and achieving up to 9.334Gbps aggregate throughput.

 

JustWiFi⁷™ breaks away from conventional Wi-Fi module design. By connecting via Ethernet protocols, the host treats the module as an Ethernet port. All Wi-Fi processes such as Multi-Link Operation (MLO), etc happen inside the module. This drastically reduces software integration such as requiring kernel-specific driver or host-side firmware, while expanding cross-platform compatibility from Intel x86 to ARM-based System on a Chip (SoCs) like NXP and Marvell regardless of operating system.

 

Designed for industrial, IoT, edge and enterprise use, WPM530 simplifies wireless design while delivering the full performance of Wi-Fi 7 even on non-Qualcomm platforms.
What Sets Compex JustWiFi⁷™ Apart?
Driverless Ethernet Integration: Skip the driver development. Compex JustWiFi⁷™ connects via Ethernet Protocols with any host platform, no kernel- specific drivers or host-side firmware work.
Standalone & Host-Independent Design: All wireless functions happen inside the module.
True Tri-band Wi-Fi 7: Concurrent 2×2 2.4GHz, 5GHz and 6GHz for superior performance – aggregate throughput of up to 9.334 Gbps
MLO Without Hassle: Unlock the power of Multi-Link Operation for better throughput, low latency and enhanced reliability even on non-Qualcomm hosts, removing the need for traditional driver-based implementations that are tightly tied with the host chipset.
Flexible Configuration: Configure and manage with ease via command line.
EasyMesh Capable:EasyMesh support from the module.
Accelerated Time to Market: Simplifies wireless product development by removing driver development and firmware dependencies.

 

Specifications
Chipset(s) Qualcomm IPQ5322 Quad-Core Cortex-A53 @ 1.5GHz processor ‘Miami’ Series
Qualcomm QCN6274 ‘Waikiki’ series for radio
Wireless 2×2 Tri-Band Concurrent 2.4GHz, 5GHz & 6GHz
Host Interface 2x MiniPCIe interface (for powering module only; powering through either interface is sufficient)
10Gbps serial interface, using Ethernet protocol
Type of Connector(s) 2x U.FL Connectors
Power Consumption (Board only) 20W (Max)
Operating Voltage 3.3V
Environmental Compliances
USA REACH
EU Region
RoHS
Get the needed information HERE